laminar flow hood
- 1/1
A laminar flow hood is the main product used in these cleanrooms. The structural characteristics of our
products are divided into two types: top air intake and side air intake. They can be matched with a variety
of usage environments.
These are our product parameters, I believe they will help you choose our products better.
|
Supply voltage |
220V/50Hz/single phase |
|
Cleanliness level |
Static Class A |
|
Wind speed |
0.45±20%m/s |
|
Filtration efficiency |
99.995%@0.3um |
|
Single fan noise |
≤65db |
|
Built-in hidden lighting, illumination |
≥300lux |
|
Cleanliness |
IS05(100 level) |
|
PA0 detection |
The PA0 test pass rate is 100% (in compliance with the new GMP test standards) |
|
Replace the filter |
Generally, it should be replaced when the final resistance is twice the initial resistance (the initial resistance is generally 80~120Pa). |
|
Leak detection |
The laminar flow hood has a double-layer plate structure. The unique structure creates a negative pressure state between the two layers of the box to ensure no leakage. |
|
Equipped with a standard diameter of φ50.5 PA0 detection hole and a stainless steel quick connector, which can quickly detect PAO |
